Icom IP1000C, Instruction Manual, Page: 22 / 246

2
SETTING UP THE IP1000C SYSTEM
2-3
1. Flow using the WLAN transceiver
■
About the Setting procedures
2. Transceiver presettings
Register the IP100H, IP110H, or IP100FS to use into this IP1000C.
[Transceiver Registration] screen (pp. 2-5, 4-34)
Enter the Transceiver model, Name and Unit ID, Password and Setting group.
L
The default password is “iptrx,” and you can change it for security.
L
The common settings that are used by the group, are set in the [Common Settings] menu.
Setting by the CS-IP100H/CS-IP110H cloning (programming) software (p. 2-6)
After WLAN transceivers are registered to the IP1000C, set the wireless LAN setting, provisioning server
setting (IP1000C) to all the WLAN transceivers.
•The CS-IP100H and CS-IP110H is a freeware that can be downloaded from the Icom website.
•First, read the instructions of the CS-IP100H and CS-IP110H that can be downloaded from the Icom
website, and follow its procedure to connect the programming cable between the WLAN transceiver and a
PC.
3. Transceiver Settings (pp. 4-38, to 4-137)
Set or assign the functions to all the WLAN transceivers that are registered on the [Transceiver Registration]
screen.
•Use ID list • Communication Method (Simplex/Full-Duplex)
•Priority Call • Area Call
•Message • Status
4. Destination Settings (p. 2-8)
The registered WLAN transceivers or IP100FS on the [Transceiver Registration] screen, are assigned to a
group, assigned a group ID and the communication type is set on the [Destination Settings] screen.
5. Common Settings (pp. 2-10 to 2-13)
Set common settings of each group that the WLAN transceivers or IP100FSs belong to and are registered on
the [Transceiver Registration] screen.
[ID List] screen
Register the unit IDs that are registered on the [Transceiver Registration] screen or the group IDs that are
registered on the [Destination Settings] screen.
L
When an IP1000C’s bridge connection is made with a VE-PG3, you can register the telephone number of the IP phone.
[Message]
screen
Enter messages that the WLAN transceivers will send.
Up to 32 characters can be programmed. (Up to 10 messages.)
[Status]
screen
Enter Statuses that the WLAN transceivers will send.
Up to 32 characters can be programmed. (Up to 10 statuses.)
[Common Settings]
screen
Specify the ID list and message list of the group that the WLAN transceivers belongs.