4
ABOUT THE SETTING SCREEN
4-53
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP100H]
22
Target Availability Check �
Select whether the IP100H displays a confirmation after it makes an
Individual Call, or not.
(Default: Enable)
When “Enable” is selected, the IP100H displays the “Connected,”
“Busy” or “No response” connection status.
1/24 16:57
Connected
L
When the target station is out of range, “No response” is displayed.
L
If the “Connection Notice Tone” item is set to “Enable,” the Success Tone or
Failure Tone sounds to notify its connection status.
Common Settings (menu) > Common Settings (screen) > Common Settings
> Connection Notice Tone
23
Key-Touch Beep �����
Select whether the IP100H sounds the key touch beep or not.
(Default: Enable)
When “Disable” is selected, the IP100H does not sound the
confirmation beep when a key is pushed.
•
Level
Set the volume level of the notification beeps when the IP100H’s key
is pushed.
(Default: 10)
Selectable range are between 0 and 10.
L
When “0” is selected on this setting, IP100H does not sound any beep
even if the volume level is set.
L
When selecting “Disable,” this setting is grayed out and the volume level
cannot be changed.
19
20
21
22
23
(This is only an example.)