Icom IP1000C, Instruction Manual, Page: 32 / 246

2
SETTING UP THE IP1000C SYSTEM
2-13
2. Transceiver settings
■
About commonly use the ID list and message in the group
Specify the ID and message lists of the group that the WLAN transceiver belongs to.
After registration is finished, the WLAN transceiver needs to be rebooted.
Click [Common Settings], then [Profile].
• The [Profile] screen is displayed.
1
Select the profile number in the “Profile” field.
• The profile number setting (example: 1) is specified in the “Profile” item on the [Transceiver Registration] screen in
each WLAN transceiver.
2
Select the “ID List” and “Message List” in the “Profile” field.
3
Enter
Select the specified ID list group on the [ID List]
screen (p. 2-10) or message group on the [Message]
screen (p. 2-11).
Click <Apply>.
4
Click
After registration is finished, confirm the registered contents in the “Profile List” field.
5
Confirm