4
ABOUT THE SETTING SCREEN
4-144
10. [Destination Settings] Menu
[Destination Settings]–[Destination Settings]
■
Destination Settings
Call Type: Talkgroup
1
2
3
4
5
6
7
8
9
10
11
(These are examples when the “Call Type” item is set to “Talkgroup.”)
7
Talkgroup Call for IP100FS
Select whether or not the Talkgroup Call includes the IP100FSs.
(Default: Enable)
8
Callee ID for IP100FS ��
When the “Talkgroup Call for IP100FS” item is set to “Enable,” set the
destination IP100FSs.
(Default: All)
When “Appointment” is selected, you can register up to 5 IP100FS’s
Destination IDs (00001 ~ 60000).
9
Additional Controller ��
Select an Additional Controller when configuring several controllers,
and the Talkgroup call calls between the different controllers.
L
By clicking the [All] box, you can select or cancel all entries in the list.
L
If [Sub] is selected on the [Controller Mode] item in the [RoIP Settings]
screen, select an Additional Controller on this setting as shown below.
10
<Apply> ��������
Click to apply the entries.
11
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Apply>.