4
ABOUT THE SETTING SCREEN
4-83
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP110H]
28
[P1] ~ [P5] …………………… •
Emergency
Hold down the programmable key until “Emergency” is displayed to
send an emergency call.
When the emergency call is sent, an alarm sounds. The emergency
call is canceled and the alarm stops when the transceiver receives a
response or the programmable key of the transceiver is held down.
L
The time of period for which the key must be held down to turn the
emergency function ON or OFF is set in the [Emer SW ON Timer] item or
[Emer SW OFF Timer] item.
IP110H
VS-3
[P2]
[P1]
[P4]
[P3]
[P5]
28
29
30
31
32
(This is only an example.)
NOTE:
The IP1000C should not be used when high reliability is necessary.
The communication cannot be made, depending on the environment around the IP1000C, such as the
consumption of a battery, the signal environment, or the access point or network status.
Use the [Emergency] and [Lone Worker] functions as a supplementary function.