![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215053.webp)
4-8
4
RECEIVE AND TRANSMIT
Operating in the CW mode (Continued)
■
D
Selecting the CW-R (CW reverse) mode
The CW-R (CW Reverse) mode receives CW signals
on the reverse sideband like that of the LSB and USB
modes.
Use when interference is near the desired signal and
when you want to shift the tone of the interfering sig-
nal.
Push
q
MODE
one or more times to select the CW
mode.
w
Hold down
MODE
for 1 second to select the CW or
CW-R mode.
• Check the interfering tone.
D
Adjusting the CW tone pitch control
The received CW tone pitch and monitored CW tone
pitch can be adjusted to between 300 and 900 Hz,
without changing the operating frequency.
q
When the CW or CW-R mode is selected, hold down
M-CH/RIT
SET
for 1 second to enter the Quick Set mode.
Rotate
w
[M-CH] to select “CW PITCH”, then rotate
[DIAL] to adjust to the desired tone pitch.
• The CW tone pitch is adjusted to between 300 and
900 Hz, in 10 Hz steps.
Push
e
M-CH/RIT
SET
to exit the Quick Set mode.
• Receive audio tone response
CW
-R mode (USB side)
CW mode (LSB side)
BFO
600 Hz
Desired signal
Inteference
Desired signal
600 Hz
BFO
Inteference
Hold down
for 1 second
[DIAL]
[M-CH]
This shows the default setting for
the CW tone pitch control (600 Hz).
Previous view