![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215085.webp)
7-3
7
MEMORY OPERATION
You can program the Memory channels in either the
VFO mode or in the Memory mode.
D
Programming in VFO mode
Push
q
V/M
➔
to select the VFO mode.
Rotate
w
[DIAL] to set the desired frequency, and
then push
MODE
to set the operating mode.
Rotate
e
[M-CH] to select the desired memory chan-
nel.
• If the RIT control indicator lights orange, push
M-CH/RIT
SET
.
(p. 7-2)
• “
” appears if the selected memory channel is a
blank channel (one without any stored data.)
Lower channels
Higher channels
RIT control indicator
goes out
Hold down
r
MW
for 1 second to write the displayed
frequency and operating mode into the selected
memory channel.
• 3 beeps sound when memory writing is completed.
[EXAMPLE]: Programming 7.088 MHz/LSB
into channel 12.
VFO mode
7.088 MHz/LSB are programmed into channel 12.
[EXAMPLE]: Programming 7.088 MHz/LSB
into channel 12.
VFO mode
7.088 MHz/LSB are programmed into channel 12.
[EXAMPLE]: Programming 7.088 MHz/LSB
into channel 12.
VFO mode
7.088 MHz/LSB are programmed into channel 12.
[EXAMPLE]: Programming 7.088 MHz/LSB
into channel 12.
VFO mode
7.088 MHz/LSB are programmed into channel 12.
7.088 MHz/LSB
Hold down
MW
Rotate
[M-CH]
[DIAL]
[M-CH]
■
Programming memory channels
Previous view