![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215074.webp)
6-3
6
FUNCTIONS FOR TRANSMIT
VOX function (Continued)
■
D
VOX Set mode
Hold down
q
VOX
for 1 second to enter the VOX Set
mode.
Rotate
w
[M-CH] to select “VoX GAIN.”
While speaking into the microphone at your normal
e
voice level, rotate
[DIAL] to the point where the
transceiver continuously transmits.
Rotate
r
[M-CH] to select “ANTI-Vox.”
During receive, rotate
t
[DIAL] to adjust the anti-
VOX gain to the point where the transceiver does
not switch to transmit due to received audio from
the speaker, or background noise.
Rotate
y
[M-CH] to select “VoX DELY.”
Rotate
u
[DIAL] to adjust the VOX delay for a conve-
nient interval before returning to receive.
Push
i
VOX
to exit the VOX Set mode.
VOX Gain
50% (default)
[DIAL]
[M-CH]
VOX
28
9
VOX GAIN
Adjusts the VOX gain for the VOX (Voice-Operated
Transmission) function. Higher values make the VOX
function more sensitive to your voice.
• Hold down
M-CL
for 1 second to return to the default
value.
ANTI-VOX
Adjusts the ANTI-VOX gain for the VOX (Voice-Oper-
ated Transmission) function. Higher values make the
VOX function less sensitive to receiver output audio
from a speaker or headphones.
• Hold down
M-CL
for 1 second to return to the default
value.
VOX DELAY
This item adjusts the VOX (Voice-Operated Transmis-
sion) delay time. VOX Delay is the amount of time the
transmitter stays on after you stop speaking.
Adjust the delay time between 0 and 2.0 seconds, in
0.1 second steps.
• Hold down
M-CL
for 1 second to return to the default
value.
50% (default)
50% (default)
0.2 seconds (default)
Previous view