![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215082.webp)
6-11
6
FUNCTIONS FOR TRANSMIT
The IC-7200 has a built-in circuit for measuring an-
tenna SWR—no external equipment is necessary.
Push
q
MODE
one or more times to select the RTTY
mode.
Rotate
w
[DIAL]
to the desired operating frequency.
Set the output power to 30 W or more. (p. 3-14,
e
10-4)
Hold down
r
ANF
METER
for 1 second one or more times
to select the SWR meter.
Push
t
[PTT]
to transmit, then read the actual SWR
on the meter.
•
≤
1.5 well-matched antenna
•
>
1.5 may indicate your antenna is out of its well-
matched frequency range. If over 2.0, check antenna
and cable connections.
Split frequency operation (Continued)
■
D
Split lock function
Accidentally releasing
RIT
while rotating
[DIAL]
changes the receive frequency. To prevent this, use
both the split lock and dial lock functions to change
the transmit frequency only. The split lock function
cancels the dial lock function while holding down
RIT
during split frequency operation.
The dial lock’s effectiveness during split frequency
operation can be selected in the Set mode for both
receive and transmit frequencies; or only the receive
frequency. (p. 10-10)
When the split lock function is ON, the transmit fre-
quency cannot be adjusted by rotating
[DIAL]
while
transmitting, even if the lock function is not ON.
Set the split lock function ON in the Set mode.
q
During split operation, hold down
w
SPCH
for 1 second
to turn ON the dial lock function.
• “
” appears.
While holding down
e
RIT
*, the transmit frequency
and mode are displayed. And Rotate
[DIAL]
to set
the transmit frequency.
*XFC function should be turned ON first. (p. 10-11)
q
Hold down
M-CH/RIT
SET
for 1 second twice to en-
ter the Set mode.
w
Rotate
[M-CH]
to select “
SPLIT LK
.”
e
Rotate
[DIAL]
to select ON.
r
Push
M-CH/RIT
SET
to exit the Set mode.
Appears
The best match is in this range.
[DIAL]
[DIAL]
[M-CH]
OFF (default)
■
Measuring SWR
Previous view