![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215017.webp)
1-14
1
PANEL DESCRIPTION
■
Rear panel
DC 13.8V
ACC
KEY
SEND
ALC
ANT
REMOTE EXT SP
GND
TUNER
q
w
e
t
r
q
TUNER CONTROL SOCKET [TUNER] (p. 2-6)
Accepts the control cable from an optional antenna
tuner.
w
GROUND TERMINAL [GND] (p. 2-2, 2-3)
Connects to a ground to prevent electrical shocks,
TVI, BCI and other problems.
e
DC POWER SOCKET [DC 13.8V] (p. 2-5)
Accepts 13.8 V DC through the supplied DC power
cable.
Rear panel view
r
ACCESSORY SOCKET [ACC]
Enables connection to external equipment such as
a TNC for data communications, a linear amplifier or
an automatic antenna tuner, and so on.
• See below for socket wiring information.
t
ELECTRONIC KEYER JACK [KEY]
Accepts a key or paddle connector for the internal
electronic keyer.
• The keyer type selection between the internal electronic
keyer and straight key operation can be made in the Set
mode.
When connecting
a straight key
When connecting
a paddle
(dot)
(com)
(dash)
(
⊕
)
If you use an external electronic keyer, make sure
the output voltage of the keyer is less than 0.4 V
when keying the transmitter.
Previous view