![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215047.webp)
4-2
4
RECEIVE AND TRANSMIT
■
Operating in the SSB mode
Hold down
q
F-INP ENT
BAND
for 1 second, then push a
band key to select the desired band.
Push
w
MODE
to select the SSB mode.
• Hold down
MODE
for 1 second to toggle between the
LSB and USB modes.
• Below 10 MHz LSB is automatically selected; above 10
MHz USB is automatically selected.
Rotate
e
[DIAL] to tune in a desired signal.
• The S-meter displays the received signal strength.
Rotate the
r
[AF] control to set audio to a comfort-
able listening level.
Push
t
[PTT] to transmit.
• “
” appears.
Speak into the microphone at your normal voice
y
level.
• Adjust ‘MIC Gain’ at this step, if necessary. (p. 10-4)
Release
u
[PTT] to receive.
D
Convenient functions for receiving
• Preamp and attenuator (p. 5-3)
Push
➥
P.AMP
ATT
to turn the preamp ON or OFF.
• “
” appears when the preamp is ON.
Hold down
➥
P.AMP
ATT
for 1 second to turn ON the at-
tenuator.
• “
” appears when the attenuator is ON.
• Push
P.AMP
ATT
to turn OFF the attenuator.
• Twin PBT (passband tuning) (p. 5-4)
Rotate
➥
[TWIN PBT] (controls–inner/outer).
Band keys
[DIAL]
[AF]
“
USB” or “LSB” appears.
Appears while transmitting.
[TWIN PBT]
Previous view