![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215106.webp)
10-9
10
SET MODE
LCD Backlight
Set the brightness of the LCD to HI (High), Lo (Low)
or oF (Off).
Beep
A beep sounds each time a key is pushed. This func-
tion can be turned OFF for silent operation.
on : The Confirmation beep is ON.
oF : The Confirmation beep is OFF.
The volume level can be set in “Beep Level,” as de-
scribed below.
High (default)
ON (default)
Items in the Set mode (Continued)
■
Band Edge Beep
A beep sounds when an operating frequency enters
or exits an amateur band. This function is indepen-
dent from the “Beep” setting as described above.
on : The Band edge beep is ON.
oF : The Band edge beep is OFF.
The volume level can be set in “Beep Level,” as de-
scribed below.
Beep Level
Set the maximum volume level for the confirmation
beep and band edge beep tones to between 0% and
100%, in 1% steps.
When beep tones are set to OFF, this setting has no
effect.
Beep Level Limit
Turn the beep tones output level limiting ON or OFF
for the confirmation and band edge beep tones.
When this item is set to ON, the beep tones are linked
to the [AF] control until rotation of the [AF] control
reaches to the specified level—further rotation will
not increase the volume of the beep tones.
on : The Beep level is limited with the [AF] control.
oF : The Beep level is linked to the [AF] control.
ON (default)
50% (default)
ON (default)
Previous view