![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215057.webp)
4-12
4
RECEIVE AND TRANSMIT
Operating in the RTTY (FSK) mode (Continued)
■
D
Selecting the RTTY-R (RTTY reverse) mode
Received characters are occasionally garbled when
the receive signal’s MARK and SPACE are reversed.
This reversal can be caused by incorrect TNC con-
nections, settings, commands, and so on.
To receive a reversed RTTY signal correctly, select
the RTTY-R (RTTY reverse) mode.
Push
q
MODE
to select RTTY mode.
Hold down
w
MODE
for 1 second to toggle between
the RTTY and RTTY-R modes.
Reverse
Normal
BFO
170
Hz
2125
Hz
170
Hz
2125
Hz
BFO
Mark
Space
Displayed freq
uency
Displayed frequency
Mark
Space
D
Selecting the Twin peak filter
The twin peak filter changes the receive frequency re-
sponse by boosting two particular frequencies (2125
and 2295 Hz) for better copying of desired RTTY sig-
nals.
Push
q
MODE
to select RTTY mode.
•
Hold down
MODE
for 1 second to toggle between the
RTTY and RTTY-R modes.
Hold down
w
M-CH/RIT
SET
for 1 second to enter the Quick
Set mode.
Rotate
e
[M-CH]
to select “
TPF
”, then rotate
[DIAL]
to turn the twin peak filter function ON or OFF.
• The received audio volume may become greater when
the twin peak filter is ON.
Push
r
M-CH/RIT
SET
to exit the Quick Set mode.
OFF (default)
[DIAL]
[M-CH]
Previous view