![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215040.webp)
3-9
3
BASIC OPERATION
Frequency setting (Continued)
■
D
Selecting the Auto tuning step
When rotating the tuning dial rapidly, the tuning speed
accelerates automatically if selected.
Hold down
q
M-CH/RIT
SET
for 1 second twice to enter the
Set mode.
Rotate
w
[M-CH] to select “AUTo TS.”
Rotate
e
[DIAL] to select the desired tuning speed
between HI (High), Lo (Low) and oF (OFF).
• HI : Approximately 5 times faster when the tuning step
is set to 1 kHz or smaller steps; approximately 2
times faster when the tuning step is set to 5 kHz or
larger steps.
• Lo : Approximately 2 times faster
• oF : Auto tuning step is turned OFF
• Hold down
M-CL
for 1 second to select a default option
or value.
Push
r
M-CH/RIT
SET
to exit the Set mode.
While operating in SSB data/CW/RTTY, the ¼ tuning
function can be used for critical tuning. Dial sensitivity
is reduced to ¼ of normal when the ¼ function is in
use.
Hold down
q
M-CH/RIT
SET
for 1 second twice to enter the
Set mode.
Rotate
w
[M-CH] to select “DIAL ¼.”
Rotate
e
[DIAL] to select the ¼ tuning function ON
or OFF.
• Hold down
M-CL
for 1 second to select a default option
or value.
Push
r
M-CH/RIT
SET
to exit the Set mode.
NOTE: This function is only selectable when the
Quick tuning function is OFF. (p. 3-7)
D
Using the ¼ tuning function (SSB data/CW/RTTY only)
[DIAL]
[M-CH]
When “HI” is selected (default)
When “OFF” is selected (default)
[DIAL]
[M-CH]
Previous view