![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215111.webp)
10-14
10
SET MODE
SSB/CW Synchronous Tuning
Turns the displayed frequency shift function ON or
OFF.
When this function is set to ON, the received signal
will remain the same even when the operating mode
is changed between SSB and CW.
The amount of frequency shift will change according
to the CW tone pitch setting.
on : The displayed frequency shifts when the op-
erating mode is changed between SSB and
CW.
oF : The displayed frequency does not shift.
CW Normal Side
Select the carrier point of the CW mode between
LSB and USB.
L (LSB) : LSB is the normal mode.
U (USB) : USB is the normal mode.
Items in the Set mode (Continued)
■
OFF (default)
LSB (default)
Break-In
Selects the CW break-in type.
Full break-in (QSK) activates the receiver between
transmitted dots and dashes. This is useful when
operating contests, when “fast responses” are com-
mon.
Semi break-in keeps the receiver quiet between dots
and dashes, and automatically returns to receive af-
ter a pre-set time after you stop keying.
When break-in is turned off, the key or paddle can
generate side tones, selectable in the Quick Set
mode, but will not transmit.
oF
: No break-in operation
SE (Semi) : Semi break-in operation
FL (Full) : Full break-in operation
Break-In Delay
Adjusts break-in delay time for CW semi break-in
operation between 0.2 and 13.0 (dots), in 0.1 (dot)
steps.
OFF (default)
7.5 dots (default)
Previous view