![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215041.webp)
3-10
3
BASIC OPERATION
When selecting a frequency that is outside of a band’s
specified frequency range, a warning beep sounds.
The beep function can be turned OFF in the Set
mode, if desired.
Hold down
q
M-CH/RIT
SET
for 1 second twice to enter the
Set mode.
Rotate
w
[M-CH] to select “BAND BEP.”
Rotate
e
[DIAL] to turn the band edge warning beep
function ON or OFF.
• Hold down
M-CL
for 1 second to select a default option
or value.
Push
r
M-CH/RIT
SET
to exit the Set mode.
Frequency setting (Continued)
■
D
Setting the Band edge warning beep
When “ON” is selected (default)
[DIAL]
[M-CH]
Operation on the 5 MHz frequency band is allowed
on 5 discrete frequencies and must adhere to the fol-
lowing:
• The USB, USB Data and CW modes
• Maximum of 100 watts ERP (Effective Radiated Power)
• 2.8 kHz bandwidth (maximum)
It is your responsibility to set all controls so that trans-
mission in this frequency band meets the stringent
conditions under which amateur operations may use
these frequencies.
NOTE: We recommend that you store these fre-
quencies, modes and filter settings into memory
channels, for easy recall.
To assist you in operating within the rules specified
by the FCC, transmission is illegal on any frequen-
cies other than the five shown in the tables to the
right.
• For the USB and USB Data modes
The FCC specifies center frequencies on the 5 MHz
frequency band. However, the transceiver displays
carrier frequency. Therefore, tune the transceiver to
1.5 kHz below the specified FCC channel center fre-
quency.
Transceiver Displayed
Frequency
FCC Channel
Center Frequency
5.33050 MHz
5.33200 MHz
5.34650 MHz
5.34800 MHz
5.35700 MHz
5.35850 MHz
5.37150 MHz
5.37300 MHz
5.40350 MHz
5.40500 MHz
• For the CW mode
The transceiver displays the center frequency. There-
fore, tune the transceiver to the specified FCC chan-
nel frequency when you operate in these mode.
Transceiver Displayed
Frequency
FCC Channel
Center Frequency
5.33200 MHz
5.33200 MHz
5.34800 MHz
5.34800 MHz
5.35850 MHz
5.35850 MHz
5.37300 MHz
5.37300 MHz
5.40500 MHz
5.40500 MHz
D
About the 5 MHz band operation (USA version only)
Previous view