Icom IC-7200, Advanced Instructions

Page: 101 / 127

10-4
10
SET MODE
RF power (all modes)
Adjusts the RF output power to between L (Low), and
1% to 100%, in 1% steps.
Mic gain (SSB/AM modes)
Adjusts microphone gain to between 0% and 100%,
in 1% steps.
100% (default)
50% (default)
■
Items in the Quick Set mode
Item
Range or Value
(Default is shown in bold)
Descriptions
Operating
Mode
Refer
RF POWER
L (Low) and 1 to
100%
, in 1% steps Adjusts the RF output power. All
p. 10-4
MIC GAIN
0 ~ 50 ~ 100%, in 1% steps Adjusts the microphone gain. SSB/AM
DATA MODE
on or
oF
Turn the data mode ON or OFF. SSB/AM
p. 10-5
KEY SPEED
6 ~ 20 ~ 60* wpm (words per minute).
* 39, 43, 45, 47, 49, 51, 53, 55, 56, 58
and 59 cannot be selected.
Adjusts the CW key speed. CW
CW TONE
PITCH 300 ~
600
~ 900 Hz, in 10 Hz steps Adjusts the CW receive tone pitch. CW
SIDE TONE
LEVEL 0 ~ 30 ~ 100%, in 1% steps Adjusts the CW side tone level. CW
SIDE TONE
LIMIT
on
or oF Turn the CW side tones output lev-
el limiting capability ON or OFF. CW
TWIN PEAK
FILTER
on or oF
NOTE: The RTTY mark frequency
(2125 Hz) and shift width (170 Hz)
are automatically set when the twin
peak filter is ON.
Turn the twin peak filter ON or
OFF. RTTY
p. 10-6
RTTY MARK
TONE 1275, 1615 or
2125
Hz Sets the RTTY mark frequency. RTTY
RTTY SHIFT
170
, 200, 425 or 850 Hz Sets the RTTY shift width. RTTY
RTTY KEY
POLARITY n (Normal) or r (Reverse) Sets the RTTY keying polarity. RTTY
Previous view