![background image](http://html.mh-extra.com/html/icom/ic-7200/ic-7200_advanced-instructions_612215119.webp)
11-5
11
CONTROL COMMAND
Cmd.
Sub cmd.
Data
Description
1A
0343
0
Send/read MIC UP/DOWN keyer (HM-
36) OFF
1
Send/read MIC UP/DOWN keyer (HM-
36) ON
0344
0
Send/read SSB mode selection OFF
(inhibition)
1
Send/read SSB mode selection ON
(selectable)
0345
0
Send/read CW mode selection OFF
(inhibition)
1
Send/read CW mode selection ON (se-
lectable)
0346
0
Send/read RTTY mode selection OFF
(inhibition)
1
Send/read RTTY mode selection ON
(selectable)
0347
0
Send/read AM mode selection OFF (in-
hibition)
1
Send/read AM mode selection ON (se-
lectable)
0348
0
Send/read CI-V transceive function
OFF
1
Send/read CI-V transceive function ON
0349
0 to 255 Send/read reference frequency set
(0=0% to 255=100%)
0350
0 to 255 Send/read noise blanker level set
(0=0% to 255=100%)
0351
0 to 255 Send/read noise blanker width set
(0=0% to 255=100%)
0352
0 to 15 Send/read NR level set
(0=0 to 15=15)
0353
0 to 255 Send/read VOX gain set
(0=0% to 255=100%)
0354
0 to 255 Send/read Anti-VOX gain set
(0=0%, 255=100%)
0355
0 to 20 Send/read VOX delay set
(0=0.0 sec. to 20=2.0 sec.)
0356
0 to 10 Send/read speech compressor level
(0=0 to 10=10)
04
—
Send/read DATA mode with filter set
(see to the right for detail)
05
0
Send/read Sharp selection for DSP fil-
ter shape
1
Send/read Soft selection for DSP filter
shape
06
0
Send/read manual notch width Wide
1
Send/read manual notch width Mid
2
Send/read manual notch width Narrow
1C
00
0
Send/read the transceiver’s status RX
1
Send/read the transceiver’s status TX
01
0
Antenna tuner OFF (through)
1
Send/read Antenna tuner ON
2
Send/read Manual tuning selection
D
Band stacking register
Command: 1A 01
To send or read the desired band stacking register’s
contents, a combination of the frequency band and the
register codes (“01” is fixed as the register code) as
follows are used.
For example, when sending/reading the contents in
the 21 MHz band, the code “0701” is used.
• Frequency band codes
CODE
BAND
FREQUENCY RANGE
01
1.8 MHz
1.800000 – 1.999999
02
3.5 MHz
3.400000 – 4.099999
03
7 MHz
6.900000 – 7.499999
04
10 MHz
9.900000 – 10.499999
05
14 MHz
13.900000 – 14.499999
06
18 MHz
17.900000 – 18.499999
07
21 MHz
20.900000 – 21.499999
08
24 MHz
24.400000 – 25.099999
09
28 MHz
28.000000 – 29.999999
10
50 MHz
50.000000 – 54.000000
11
General
Other than above
D
Data mode with filter width setting
Command: 1A 04
The following data sequence is used when sending or
reading the data mode with filter width setting.
X X X X
00=Data mode OFF
01=Data mode ON
00=Data mode OFF
01=FILTER Wide
02=FILTER Mid
03=FILTER Narrow
Second parameter
First parameter
w
q
Controlling the radio with CI-V
■
Command table (Continued)
D
Previous view