Maint
06-0340
6.9.2
Imprint Test
Prepare a sheet to be used for the Imprint Test.
Set one sheet to be printed in the landscape direction on the Scanner. and click [Yes].
During the Imprint Test, only one sheet is fed even many sheets are set on the Input Tray.
Check the printed character every sheet, run the Imprint Test until printed properly.
(1) For the "Specifying sheet size", click the [Regular size]. Or click the [Specified size] and type in the paper
size.
・
If you scan the [Regular size] sheet: Click the [Regular size] and select the paper size from the menu.
・
If you scan the [Specified Size] sheet: Click the [Specified Size]. Measure the size of the prepared sheet and
type in its length and width in millimeters. You can specify the sheet size within following range in 0.1mm
unit.
