Maint
08-0550
8.3.22 Replacing Motor assemblies
■ Motor assembly (Hopper)
(1) Remove the Top Cover, Main Cover (L) / (R) and Side Cover (L) / (R). See
“8.1.1 How to remove or attach
the covers”
.
(2) Remove the Input Tray. See
“8.3.6 Replacing Input Tray”
.
(3) Remove the Front Guide assembly. See
“8.1.2 How to remove or attach the guides”
.
(4) Remove 2 bind-head screws (
SB406N
) fixing the Motor assembly (Hopper) and the connector of the Motor
assembly (Hopper), and then remove the Motor assembly (Hopper).
(5) Attach using the above steps in reverse.
connector
Motor assembly
(Hopper)
bind-head screw (
SB406N
) x2
Elevator assembly
Necessary Tools: Phillips Screwdriver (No.2)
