Maint
01-0000
1. Introduction
To use the Scanner, it needs to be connected to the host system through USB interface.
That means when you work on maintenance, you can choose from Stand-Alone Operations, which run using
the Scanner alone, or Miscellaneous Tool or Diagnosis, both of which run using the host system, depending on
what has to be done.
1.1
Configuration of Maintenance Procedure
Maintenance
Procedure
2. Component Names and Functions
3. Periodic Inspection and Maintenance
Items
Lists of work items for a periodic inspection.
1. Introduction
7. Diagnosis
Run when the host system is connected.
5. Stand-Alone Operations
Run scanner alone w/o the host.
6. Miscellaneous Tool
Run when the host system is connected
4. Diagnosis Functions
9. Checking and Adjustment
How to check and adjust parts which needed to be.
8. Parts Replacement Procedure
How to replace periodic replacement
parts and how to replace maintenance
parts.
10. Replacing Consumables and Scanner Utilities
How to replace consumables and how to use the
Scanner Utilities.
