Maint
08-0680
8.3.29 Replacing Anti-static Brush
■ Anti-static Brush on Top Guide assembly
(1) Remove the Top Cover. See
“8.1.1 How to remove or attach the covers”
.
(2) Remove the Anti-static Brush from the Top Guide assembly and attach new one on the Top Guide assembly.
(3) Attach using the above steps in reverse.
■ Anti-static Brush on T11 Guide (A)
(1) Remove the Top Cover and Main Cover (L) / (R). See
“8.1.1 How to remove or attach the covers”
.
(2) Remove the Output Tray (Upper) / (Lower). See
“8.3.7 Replacing Output Trays and Output Tray Guide”
.
(3) Disconnect the connector of the PC51 sensor.
(4) Remove 4 bind-head screws (SB306N) fixing the R Stacker Back (R) assembly (F2).
(5) Remove the Anti-static Brush from the T11 Guide (A) assembly and attach new one on the T11 Guide (A).
(6) Attach using the above steps in reverse.
Top Guide assembly
Anti-static Brush
R Stacker Back (R) assembly (F2)
Anti-static Brush
bind-head screw
(SB306N) x2
bind-head screws
(SB306N)
bind-head screw
(SB306N)
connector of
PC51 sensor.
Cable route
Pass on the PC51 sensor
Necessary Tools: Phillips Screwdriver (No.2)
Necessary Tools: Phillips Screwdriver (No.2)
T11 Guide (A) assembly
