Maint
06-0170
6.6.3
Gate operation
Check the operation of the gate.
(1) Specify the parameters and click [Run].
The gate operates in the specified mode. If you want to stop the mechanical operation, click [Finish].
#1 Gate operation
Gate operation
Note
Accept/Reject alternate
(Default) (Output
Tray(L/U))
Those two positions are switched about every 0.6
seconds.
Stopped by clicking
[Pause].
Accept-side
(Output Tray(L))
The gate is moved so that the sheets are ejected to the
Output Tray(L) position.
Upper side of the gate
Reject-side
(Output Tray(U))
The gate is moved so that the sheets are ejected to the
Output Tray(U) position.
Lower side of the gate
(2) The following dialog box is displayed during operation.
If you want to stop the operation, click [Pause].
(3) Click [OK].
