IBM xSeries 260, User Manual

Page: 223 / 312

Symptom Action
The system login prompt is displayed. You may not have pressed the correct key
or you may not have pressed the key soon
enough when you were to indicate a
Service Mode boot of diagnostic programs.
If this was the case, start over at the
beginning of this step.
If you are sure you pressed the correct key
in a timely manner go to Step 7.
The system does not respond when the
password is entered. Go to Step 7.
The system stopped and an indicator is
displayed on the system console and an
eight-digit error code is not displayed. If the indicator (text or icon) represents:
Ÿ
A keyboard, record error code
M0KBD000 and report the problem to
the service organization.
Ÿ
Memory, record error code
M0MEM002 and report the problem to
the service organization.
Ÿ
SCSI, record error code M0CON000
and report the problem to the service
organization.
Ÿ
Network, record error code M0NET000
and report the problem to the service
organization.
Ÿ
Speaker/Audio, record error code
M0BT0000 and report the problem to
the service organization.
Chapter 8. Hardware Problem Determination
8-13