IBM xSeries 260, User Manual

Page: 132 / 312

Installing a Processor Card
Installing a processor card into your system unit may require updating the firmware.
A diskette or CD-ROM is included with your new processor card if that is required.
Attention: If your system unit has two processor cards, both processor cards must
be of the same clock speed.
1. If you have not already done so, shutdown the system as described in “Stopping
the System Unit” on page 4-3.
2. If you have not already done so, unplug the system unit power cable from the
electrical outlet.
3. If you have not already done so, remove the covers as described in “Removal of
Covers” on page 4-4.
4. Remove the processor and memory card cover as described in “Removal of
Processor and Memory Card Cover” on page 4-9.
5. If you have not already done so, open the card retainer latches on both ends of
the card connector.
6. Remove the dummy processor card if installed in the card connector.
4-20
User's Guide