IBM xSeries 260, User Manual

Page: 123 / 312

Installing Memory Cards
1. With one hand, touch any metal surface of the chassis to minimize static
electrical charges, and then pick up the memory card.
2. Open the retainer latches.
3. Remove the dummy memory card if installed in the connector. If only one
memory card is installed, it should be installed in bottom slot (J2).
4. Place the memory card into the card guide rails. The memory modules should
face up if installing the card the top connector (J3) and face down if installing the
card in the bottom connector (J2).
5. Make sure that the black tabs on the new card are captured by the latches.
Chapter 4. Installing Options
4-11