IBM xSeries 260, User Manual

Page: 185 / 312

Display Service Hints
This service aid reads and displays the information in the CEREADME file from the
diagnostics media. This file contains information that is not in the publications for
this version of the diagnostics. It also contains information about using this particular
version of diagnostics.
Use the arrow keys to scroll through the information in the file.
Display Software Product Data
This task invokes SMIT to display information about the installed software and
provides the following functions:
Ÿ
List Installed Software
Ÿ
List Applied but Not Committed Software Updates
Ÿ
Show Software Installation History
Ÿ
Show Fix (APAR) Installation Status
Ÿ
List Fileset Requisites
Ÿ
List Fileset Dependents
Ÿ
List Files Included in a Fileset
Ÿ
List File Owner by Fileset
Display System Environmental Sensors
This service aid displays the environmental sensors implemented on a CHRP
system. The information displayed is the sensor name, physical location code, literal
value of the sensor status, and the literal value of the sensor reading.
The sensor status can be any one of the following:
Ÿ
Normal – The sensor reading is within the normal operating range.
Ÿ
Critical High – The sensor reading indicates a serious problem with the device.
Run diagnostics on sysplanar0 to determine what repair action is needed.
Ÿ
Critical Low – The sensor reading indicates a serious problem with the device.
Run diagnostics on sysplanar0 to determine what repair action is needed.
Chapter 6. Introduction to Diagnostic Tasks and Service Aids
6-19