IBM xSeries 260, User Manual

Page: 124 / 312

6. Align the card with the connector.
7. Firmly insert the card into the connector.
8. Close the retainer latches to secure the card into the connector.
Attention: To prevent damage to the card and to the card connectors, open
and close the retainer latches at the same time.
9. Install the memory card shield between the two memory cards.
10. If you have other options to install, refer to “Option List” on page 4-10.
11. If you do not have other options to install, replace the processor and memory
card cover as described in “Replacement of Processor and Memory Card Cover”
on page 4-9.
12. Replace the system unit covers as described in “Replacement of Covers” on
page 4-36.
4-12
User's Guide