IBM xSeries 236 8841, User Manual

Page: 77 / 210

5. From the rear of the server, remove the two screws at each side of the power
supply cage.
2
1
6. Gently pull the power supply cage from the server, making sure the cables do
not snag on the chassis or system board.
Note: You might need to insert the blade of a screwdriver behind one corner of
the power supply cage to begin moving it.
Center-fan and adapter-support bracket
Note:
v
Read “Installation guidelines” on page 11.
v
Read Appendix B, “Safety information,” on page 153.
v
Read “Handling static-sensitive devices” on page 12.
When working with some options, you must first remove the center-fan and or
adapter-support bracket to access certain components or connectors on the system
board.
Note: The adapter-support bracket is attached to the center-fan bracket. Both
brackets can be removed and installed together as a single unit or
individually. See “Center-fan support bracket (dual fan guide)” on page 69 or
“Adapter-support bracket” on page 70 for instructions on how to remove
these support brackets separately.
Chapter 4. Service replaceable units
67