IBM xSeries 236 8841, User Manual

Page: 74 / 210

CD-ROM drive
Complete the following steps to remove the CD-ROM drive.
Note:
v
Read “Installation guidelines” on page 11.
v
Read Appendix B, “Safety information,” on page 153.
v
Read “Handling static-sensitive devices” on page 12.
1. Turn off the server and all attached devices.
2. Disconnect all external cables and power cords from the back of the server.
3. Remove the server cover (see “Removing the left-side cover” on page 14).
4. Remove the front bezel (see “Removing the bezel” on page 16).
5. Press in on the two blue CD-ROM drive release tabs until the drive is released
from the chassis.
6. Carefully pull the drive away from the chassis until the cables at the rear of the
drive are accessible.
7. Remove the two cables from the back of the drive and pull the drive out.
64
xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide