IBM xSeries 236 8841, User Manual

Page: 23 / 210

Removing the server door
The following illustration shows how to remove the door from the server.
Note: The illustrations in this document might differ slightly from your hardware.
CPU
VRM
MEMOR
Y HDD
PCI B
US
NMI
SMI
SER
VICE PR
OCESSOR
BU
S
NON REDUND
ANT
PO
WER SUPPL
Y
1 2 3
A B
1 2 3
FA
N
TEMPERA
TURE
Flange
Server door
Complete the following steps to remove the server door:
1. Read the safety information beginning on page v and “Installation guidelines” on
page 11.
2. Unlock and open the server door.
3. Locate the flange on the top edge of the door.
4. Press the flange downward while pressing outward on the door; then, lift the
door up and off the hinge. Set the door aside in a safe place.
Chapter 3. Installing options
13