IBM xSeries 236 8841, User Manual

Page: 127 / 210

Note: See “System replaceable units” on page 144 to determine which components should be replaced by a field
service technician.
Error code/symptom FRU/action
001-292-000
(Core system: failed/CMOS checksum
failed)
v
Load BIOS defaults and rerun test.
001-XXX-000
(Failed core tests)
v
System board
001-XXX-001
(Failed core tests)
v
System board
005-XXX-000
(Failed video test)
1. Video adapter (if installed)
2. System board
011-XXX-000
(Failed COM1 serial port test)
v
Check loopback plug connected to externalized serial port.
v
Check cable from externalized port to system board.
011-XXX-001
(Failed COM2 serial port test)
v Check loopback plug connected to externalized serial port.
v Check cable from externalized port to system board.
014-XXX-000
(Failed parallel port test)
v
System board
015-XXX-001
(USB interface not found, board damaged)
1. System board
015-XXX-015
(Failed USB external loopback test)
1. Make sure the parallel port is not disabled.
2. Run the USB external loopback test again.
3. System board.
015-XXX-198
(Remote Supervisor Adapter II SlimLine
installed) or (USB device connected during
USB test)
1. If Remote Supervisor Adapter II SlimLine is installed as an
option, remove it and rerun test.
Note: If Remote Supervisor Adapter II SlimLine is present as a
standard installation, do not remove it; the test cannot be run.
2. Remove USB devices and rerun test.
3. System board.
020-XXX-000
(Failed PCI interface test)
v System board
020-XXX-001
(Failed hot-swap slot 1 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-XXX-002
(Failed Hot-swap slot 2 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-XXX-003
(Failed hot-swap slot 3 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-XXX-004
(Failed hot-swap slot 4 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-XXX-005
(Failed hot-swap slot 5 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-XXX-006
(Failed hot-swap slot 6 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
030-XXX-000
(Failed internal SCSI interface test)
v System board
Chapter 6. Symptom-to-FRU index
117