IBM xSeries 236 8841, User Manual

Page: 19 / 210

Chapter 2. Configuration
Detailed information about configuring the server is in the IBM xSeries User’s Guide
on the IBM Documentation CD.
The latest information about these programs and the most recent device-driver files
are available at http://www.ibm.com/support/.
The following configuration programs and capabilities come with the server:
v Configuration/Setup Utility program
v
Baseboard management controller utility programs
v
SCSISelect Utility program for Adaptec
®
HostRAID
™
configuration
v
Preboot Execution Environment (PXE) boot agent utility program
Starting the Configuration/Setup Utility program
To start the Configuration/Setup Utility program:
1. Turn on the server and watch the monitor screen.
2. When the message
Press F1 for Configuration/Setup
appears, press F1.
Note: If you have set both levels of passwords (power-on and administrator),
you must type the administrator password to access the full
Configuration/Setup Utility menu. Without the administrator password,
limited Configuration/Setup Utility program functions are available.
3. Follow the instructions that appear on the screen.
© Copyright IBM Corp. 2004, 2007
9