Type the following and press Enter:
MTDDRV /?
Information similar to the following is displayed:
Drive E is partition number
for slot number 1.
Drive F is partition number
for slot number 2.
Drive G is partition number
for slot number 3.
Drive H is partition number
for slot number 4.
This example shows a system with four PC Card slots, configured for
one partition per card. You can use the memory card in your first
PC Card slot (slot 1 in this example) as drive letter E.
The number of drive letters listed depends on the number of PC
Card slots in your computer, and whether MTDDRV is configured for
multiple partitions.
Formatting Memory Cards
Attention
Make sure you are using the correct drive letter when formatting
a memory card, because any information on the specified drive is
erased. Refer to the previous section if you need to know which
drive letter to use.
To format your memory card, type the following and press Enter:
FORMAT drive_letter:
(
drive_letter
is the actual drive letter.)
For more instructions on using FORMAT, see your DOS user's
guide.
Chapter 5. Using Your Computer with a PC Card
75
Summary of Contents for ThinkPad 380Z
