IBM ThinkPad 380Z, User Manual

Page: 105 / 157

Installing the Display Driver for Windows NT
To install the display driver for Windows NT:
1
Start Windows NT, and log on with the user ID authorized as
an administrator.
2
Click on Start.
3
Move the cursor to Settings; then click on Control Panel
4
Double-click on Display.
5
In the “Display Properties” window, click on the Settings tab;
then click on Display Type....
6
In the “Adapter Type” window, click on Change.
7
Click on Have Disk....
8
Insert the Video Features Diskette (NM2200) for Windows NT
4.0 into the diskette drive; then click on OK.
A selection list appears.
9
From the display devices in the selection list, click on
NeoMagic MagicMedia 256AV, and click on OK.
The message “You are about to install a third-party driver”
appears on the screen.
10
Click on Yes.
11
Click on OK.
12
Click on Close.
13
Click on Close.
14
Restart Windows NT to make the change effective.
After you restart Windows NT, the display resolution is set to
640x480 with 256 colors as a default. If necessary, change the
resolution and refresh rate as follows:
|
15
When the “Invalid Display Settings” message appears, click on
OK.
Chapter 6. Installing Software
101