IBM ThinkPad 380Z, User Manual

Page: 63 / 157

5
Make sure the card status is off; then remove the storage PC
Card.
Using the Auto Configurator Utility
You can delete or change a registered PC Card with the Auto
Configurator Utility. You can find the Auto Configurator Utility
icon in the “PC Card Director” window.
This section describes this utility.
Note:
PC Card Director provides the Auto Configurator, a program
for some PC Cards, so that you do not have to install the
device driver supplied with it. When you install PC Card
Director, a
BASEDEV=
statement such as the following is added
to the CONFIG.SYS file.
BASEDEV=AUTODRV2.SYS
Registering a PC Card in Auto Configurator
1
Double-click on the Auto Configurator Utility ( ) icon from
the “PC Card Director” window.
2
Select a card from the Available Cards list in the “Auto
Configurator Utility” window.
Select the card for which you want to assign the resources first.
For example, if you want to assign COM3 (rather than COM2)
to a modem card, select the setting for COM3 first.
The names in the left list box (Available Cards) can be
registered. The names in the right list box (Selected Cards)
are already registered in Auto Configurator.
Chapter 5. Using Your Computer with a PC Card
59