IBM ThinkPad 380Z User Manual Download Page 103

Page: 103 / 157

Installing Software for Windows NT

This section describes the installation procedures for Windows NT
Version 4.0 and its device drivers.

Overall Procedure

Have the Windows NT installation package in hand.

Back up your software and personal data files on the hard disk.

Create the installation diskettes of the device drivers using the
Diskette Factory program. You need to create at least the
following device driver diskettes:

Install Windows NT and the device drivers.

Device Driver

Diskette Name

ThinkPad Configuration
program

Utility Diskette for Windows NT
Utility Diskette for DOS, Personalization
Utility Data Disk II

Display driver

Video Features Diskette (NM2200) for
Windows NT 4.0

PC Card support software

CardWizard for Windows NT

Audio device driver

Audio Features Diskette for Windows NT

TrackPoint driver

TrackPoint Driver Diskette II for Win95/98/NT

Infrared device driver

Infrared Driver Diskette for Windows NT

Installing Microsoft Windows NT

Before installing Windows NT, do the following:

Read the Windows NT installation guide.

If you plan to use OS/2 Warp with Windows NT, you need to use

the OS/2 Warp Boot Manager. For more information

Installing IBM OS/2 Warp .

To install Windows NT using an external CD-ROM drive, do the
following:

Chapter 6. Installing Software

Summary of Contents for ThinkPad 380Z






























































































































































Search results

Summary of Contents for ThinkPad 380Z

Reviews:

Brands by name

Popular brands

IBM ThinkPad 380Z, User Manual

Search results

Summary of Contents for ThinkPad 380Z

Reviews:

Brands by name

Popular brands