IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 92 / 232

Table 18. Clustered 1 Gb Ethernet switch Ethernet connections for VTL configuration
Callout From On Device To On Device/Location
1
Port 1, slot 5 Server A Customer network Customer designated device
2
Port 1 Ethernet switch 1 Port 2, slot 5 Server A
3
Port 1 Ethernet switch 2 Port A1 Server A
4
Port 3 Ethernet switch 2 Ethernet port, E WTI network power switch
5
Port 4 Ethernet switch 2 Port 4 Ethernet switch 1
6
Port 1, slot 5 Server B Customer network Customer designated device
7
Port 2 Ethernet switch 1 Port 2, slot 5 Server B
8
Port 2 Ethernet switch 2 Port A1 Server B
19
Port 3, slot 5 Server A Customer's
replication network Customer specified device
20
Port A2 Server A Customer's
replication network Customer specified device
26
Port 3, slot 5 Server B Customer's
replication network Customer specified device
27
Port A2 Server B Customer's
replication network Customer specified device
Procedure
1. Label and connect Ethernet cables (Cat 5e or higher) according to Figure 21 on
page 53 and Table 18.
2. Go to “Clustered Ethernet connections” on page 52 to complete the Ethernet
cabling.
Clustered 1 Gb Ethernet switch Ethernet connections for OpenStorage
configuration:
This task shows the Ethernet cabling for the 1 Gb Ethernet switches in a clustered
TS7650G for OpenStorage configuration.
About this task
Note:
Depending upon the model of the network switch being used, the port layout may
differ from what is shown in Figure 22 on page 55. If so, label the cables according
to the port number assignments specified in Table 19 on page 55, regardless of the
position of the ports on the TSSC or the switch.
54
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide