IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 170 / 232

Table 49. Site 2– Server B worksheet (continued)
Site 2 – Server B
2 (eth5)
VTL
systems or 2 (eth11)
OpenStorage
The Available Options prompt displays a third time:
Available Options:
==================
(a)dd a new record
(e)dit a record
(d)elete a record
(c)ommit changes
(q)uit
Please Choose (a,e,d,c,q):
19.
Type:
q <enter>
The message below displays:
Would you like to commit the changes performed to the routing table
now? (yes|no)
20. Type: yes <enter> .
The
Successfully committed changes!
message displays, and you are
returned to the command prompt.
Server B should now appear as a cluster member in the ProtecTIER Manager
GUI.
Note:
This is only true if the repository was created before configuring the
second node.
21. Verify that Server B was automatically added as a cluster member. To do so:
a.
At the ProtecTIER Manager workstation, in the PT Systems tab of the
Navigation
pane, select Server A.
b. Log in to Server A with the username ptadmin and password ptadmin.
In the Servers pane, verify that the IP addresses of both Server A and
Server B, display.
c. If Servers A and B are both listed in the Servers pane, go to Chapter 14,
“Testing a clustered system,” on page 139.
d. If Server B is not listed in the Servers pane, you will need to manually
add it as a cluster member. To do so:
1)
From the ProtecTIER Manager menu bar, select Cluster Management
→ Add Cluster Member
.
The Add cluster member wizard Welcome screen opens.
2)
Click Next.
The Server Selection screen opens. See Figure 47 on page 133.
132
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide
|
||||
|
|
| |||
|
|