IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 196 / 232

11. In the Address Bar area of the browser window, type the default RSA port IP
address:
172.31.1.254 (or 192.168.70.125 if the RSA is a new FRU), and then
press <enter>.
12.
In the Login window, enter
USERID
as the username and
PASSW0RD
(with a
zero) as the password, and then click OK.
Note: The username and password are case sensitive and must be entered in
all uppercase.
The Integrated Management Module Welcome window opens.
13. In the Integrated Management Module Welcome window:
a.
Use the Inactive session timeout value dropdown list to specify a
reasonable amount of time which will keep your session active until you
can complete your task. (Ten minutes should suffice.)
Do not select the No Timeout setting, as this will prevent anyone else
from logging into the RSA until you have logged out.
b. Click Continue. See Figure 51.
You are now logged into the server's RSA.
14. In the ASM section of the left-side navigation pane of the Integrated
Management Welcome window
window, click Network Interface.
15. In the Static IP Address field, change the last octet to an address value that is
lower than the default of 254.
For example:
172.31.1.253 .
16.
In the Netmask field, enter:
255.255.255.0
.
17. Leave the Gateway field blank.
18.
Click Save.
An Alert dialog opens.
19. Read the alert and then click OK to continue.
Figure 51. Integrated Management Welcome window
158
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide