IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 104 / 232

Table 24. Clustered Host fibre channel labels (continued)
Label From To Remarks
8
DD4B S2 2 HOST 4
Procedure
1.
Connect fibre channel cables according to Table 23 on page 64 and Figure 26 on
page 63. Use Table 24 on page 65 and Figure 27 on page 65 to connect to the
customer's host network.
Note: The customer must use an additional connectivity device between the
optical Fibre directly connected to RMSS optical adapters (for example, Fibre,
ESCON, or FICON) and an external public network. It can be a patch panel,
router, switch, or other suitable device. Optical Fibre connectivity that does not
go over a public network does not require an additional connectivity device.
2. Use Table 23 on page 64,Table 24 on page 65, Figure 26 on page 63 and
Figure 27 on page 65 to verify that the recommended disk components are
cabled correctly.
3. Make any necessary adjustments to cable labeling or placement, then go to
“Powering-up the components” on page 69.
Clustered fibre channel connections for OpenStorage
configuration
This task describes the fibre channel connections for theTS7650G server in a
clustered configuration with OpenStorage configuration.
66
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide
|
|