IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 66 / 232

Table 7. Clustered gateway installation checklist (continued)
U
Task Description Where to find information
h
3–6 Label and connect an Ethernet cable from the
WTI network power switch to the top 1 GB
Ethernet switch. “Cabling a clustered gateway” on page 49.
h
3–7 Label and connect an Ethernet cable from the
bottom 1 GB switch to the top 1 GB Ethernet
switch. “Cabling a clustered gateway” on page 49.
h
3–8 Label and connect an Ethernet cable from
Server A to the bottom 1GB Ethernet switch. “Cabling a clustered gateway” on page 49.
h
3–9
Label and connect an Ethernet cable from
Server B to the bottom 1GB Ethernet switch. “Cabling a clustered gateway” on page 49.
h
3–10 Label and connect an Ethernet cable from
Server A to the TSSC's Ethernet switch. “Cabling a clustered gateway” on page 49.
h
3–11a Label and connect an Ethernet cable from
Server A to the customer's LAN. “Cabling a clustered gateway” on page 49.
h
3–12 Label and connect Ethernet cables from Server
A to the customer's replication network, if
applicable. “Cabling a clustered gateway” on page 49.
h
3–13 Label and connect Ethernet cables from Server
B to the customer's replication network, if
applicable. “Cabling a clustered gateway” on page 49.
h
3–14 Label and connect an Ethernet cable from the
RSA on Server A to the TSSC's Ethernet switch. “Cabling a clustered gateway” on page 49.
h
3–15 Label and connect an Ethernet cable from
Server B to the TSSC's Ethernet switch. “Cabling a clustered gateway” on page 49.
h
3–16a Label and connect an Ethernet cable from
Server B to the customer's LAN. “Cabling a clustered gateway” on page 49.
h
3–17 Label and connect an Ethernet cable from the
RSA on Server B to the TSSC's Ethernet switch. “Cabling a clustered gateway” on page 49.
h
3–18 Label and connect an Ethernet cable from
controllers A and B of attached storage disk
controller-1, to the TSSC Ethernet switch. “Cabling a clustered gateway” on page 49.
h
3–19 Label and connect an Ethernet cable from the
TSSC's external port (Eth2) to the customer
network. “Cabling a clustered gateway” on page 49.
h
3–20 Label and connect fibre channel cables from
Server A to controllers A and B of the first
storage controller. “Cabling a clustered gateway” on page 49.
h
3–21 Label and connect fibre channel cables from
Server B to controllers A and B of the second
storage controller. “Cabling a clustered gateway” on page 49.
h
3–22a
For VTL, label and connect fibre channel cables
from Server A to the customer host network. “Cabling a clustered gateway” on page 49.
h
3–22a For OST, label and connect Ethernet cables
from Server A to the customer host network. “Cabling a clustered gateway” on page 49.
h
3–23a For VTL, label and connect fibre channel cables
from Server B to the customer host network. “Cabling a clustered gateway” on page 49.
h
3–23a For OST, label and connect Ethernet cables
from Server B to the customer host network. “Cabling a clustered gateway” on page 49.
28
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide
|||
| |
|||
|
| |
|||
| |
|||
| |
|||
|
| |
|||
|
| |
|||
| |
|||
| |
|||
| |
|||
| |