IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 96 / 232

Table 20. Clustered TSSC, KVM and customer network Ethernet connections for VTL configuration (continued)
Callout From On Device To On Device/Location
25
Port 2 KVM Switch Video port, Server B
Port E1
Procedure
1.
Label and connect Ethernet cables (Cat 5e or higher) according to Table 20 on
page 57 and Figure 23 on page 57.
Notes:
Connection of the replication network cables is required only if the customer is
enabling the data replication feature.
2. Go to “Clustered fibre channel connections” on page 61.
Clustered TSSC, KVM and customer network Ethernet connections for
OpenStorage configuration:
The tasks in this section describe the TSSC, KVM and customer network Ethernet
connections for theTS7650G server in a clustered configuration with OpenStorage.
About this task
Note:
Depending upon the model of the TSSC and TSSC network switch being used, the
port layout may differ from what is shown in Figure 24 on page 59. If so, label the
cables according to the port number assignments specified in Table 21 on page 59,
regardless of the position of the ports on the TSSC or the switch.
58
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide
|
|