IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 171 / 232

3)
In the Server IP field of the Server Selection pane, enter the IP address
of the Server you want to add to the cluster. Alternatively, you can
select the IP address from the dropdown list.
4) Click Next and then click Finish
The Add cluster member wizard closes and the Server is added to the
selected cluster.
5) Go to Chapter 13, “Changing the system date and time,” on page 135.
Note: If Server B was not automatically added to the cluster, and you were
unable to add it manually, contact your next level of support. You will need
the customer number when contacting software support. To avoid entitlement
delays, have the customer number available before initiating the call.
Figure 47. Server selection screen
Chapter 12. Upgrading ProtecTIER to a cluster
133