IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 91 / 232

regardless of the position of the ports on the switch. Refer to the IBM System
Storage TS3000 System Console (TSSC) Maintenance Information for detailed port
information.
v
Connection of the replication network cables is required only if the customer is
enabling the data replication feature.
Clustered 1 GB Ethernet switch Ethernet connections for VTL configuration:
This task shows the Ethernet cabling for the 1 GB Ethernet switches in a clustered
TS7650G for VTL configuration.
About this task
Note:
Depending upon the model of the network switch being used, the port layout may
differ from what is shown in Figure 21. If so, label the cables according to the port
number assignments specified in Table 18 on page 54, regardless of the position of
the ports on the TSSC or the switch.
Figure 21. Clustered 1Gb Ethernet switch connections for VTL configuration
Chapter 4. Installing the TS7650G hardware
53
|
|
|
|
|