IBM System Cluster 1350, Installation And Service

Page: 164 / 170

Regulatory and Compliance Requirements
The IBM eServer Cluster 1350 systems meet the following regulatory and
compliance requirements. Unless otherwise stated, the information applies to all
systems.
Telecom
Three communication interfaces exist in the IBM eServer Cluster 1350. Each
interface is an alternative configuration of the PCI-360 High Speed Serial Interface.
Only the SCC-P X.21 interface is used to support X.25 communication. This
interface is certified to European X.25 requirements. The board is labeled
appropriately for connection to Telecom networks throughout Europe. The
shipping container is labeled with the CE label.
The interface is also certified for X.25 communication in Australia.
Safety Compliance
USA
IBM eServer Cluster 1350 systems have third-party certification to UL 60950, Safety
of Information Technology Equipment.
These systems can include components such as an FC Host Adapter PCI card, the
FC Switch, the FC-AL Hub, and the FC Bridge that contain laser
component-assemblies called GLM (Gigabaud Link Module), GBIC (Gigabit
Interface Converter), and GOT (Gigabit Optical Transceiver).
All models of laser component-assemblies comply with the requirements for
Class-1 laser products set by the Department of Health and Human Services
(DHHS) regulation 21 CFR Subchapter J. This compliance is indicated by markings
on the laser component-assembly. Note that the Class 1 conformity label may not
be visible when the laser component-assembly is installed in the system.
Canada
IBM eServer Cluster 1350 systems have third-party certification to CSA 22.2 #60950,
Safety of Information Technology Equipment.
International
IBM eServer Cluster 1350 systems have third party certification, and the SQuad,
MQuad, and Bootbay are self-certified to EN60950 and comply with IEC 60950,
Safety of Information Technology Equipment.
These systems also comply with EN60825, Class 1; and with IEC 825, Class 1:
Radiation Safety of Laser Products. Systems can include components such as an FC
Host Adapter PCI card, the FC Switch, the FC-AL Hub, and the FC Bridge that
contain laser component-assemblies called GLM (Gigabaud Link Module), GBIC
(Gigabit Interface Converter), and GOT (Gigabit Optical Transceiver).
All models of laser component-assemblies are certified as Class-1 laser products
that conform to the requirements contained in the International Electrotechnical
Commission (IEC) standard 825 and CENELEC (European Committee for
Electrotechnical Standardization) European Normalization standard EN 60825. All
these assemblies are certified by the German testing institute VDE or an equivalent
agency approved by the European Union.
146
Installation and Service