IBM System Cluster 1350, Installation And Service

Page: 109 / 170

5. At the *Password>* prompt type system
6.
Define the ports by entering the following at the *IN-Reach_Priv>* prompt. Do
not try to define ports 21–40 on a port server with only 20 ports.
IN-Reach_Priv>define port 1-20 access remote
IN-Reach_Priv>define port 21-40 access remote
IN-Reach_Priv>define port 1-20 flow control enable
IN-Reach_Priv>define port 21-40 flow control enable
IN-Reach_Priv>define port 1-20 speed 9600
IN-Reach_Priv>define port 21-40 speed 9600
IN-Reach_Priv>define port 1-20 que disable
IN-Reach_Priv>define port 21-40 que disable
IN-Reach_Priv>lo port 1-20
IN-Reach_Priv>lo port 21-40
IN-Reach_Priv>init delay 0
The last command will cause the port server to save any configuration changes
and restart. The port server should now be fully operational.
Chapter 15. Port server replacement and configuration
91