IBM RS/6000 H50 Installation And Service Manual Download Page 39

Page: 39 / 327

Step 1020-4

1. Turn off, then turn on the system unit.

2. When the keyboard indicator appears, press the F1 key on a directly attached

keyboard or the 1 key on an ASCII terminal.

3. When the System Management Services appear, check the error log for any

errors.

Choose Utilities

Choose Error Log

If an error is logged, check the time stamp.

If the error was logged during the current boot attempt, record it.

Look up the error in the Chapter 3 on page 3-1 and do the listed action.

If no recent error is logged in the error log, go to “MAP 1540: Minimum
Configuration” on page 2-25.

Chapter 2. Maintenance Analysis Procedures

2-9

Summary of Contents for RS/6000 H50








































































































































































































































































































































Search results

Summary of Contents for RS/6000 H50

Reviews:

Related manuals for RS/6000 H50

Brands by name

Popular brands

IBM RS/6000 H50, Installation And Service Manual

Search results

Summary of Contents for RS/6000 H50

Reviews:

Related manuals for RS/6000 H50

Brands by name

Popular brands