IBM RS/6000 H50 Installation And Service Manual Download Page 229

Page: 229 / 327

Adapters

Removal

1. Place the drawer in the rear service position, as described in “Rear Service

Position” on page 7-23.

2. Note the slot number of the adapter you are removing.

3. If there are any external cables attached to the adapter, disconnect them.

4. Loosen and remove the screw on top of the adapter's bracket.

5. If there are any internal cables attached to the adapter, disconnect them.

6. Carefully pull the adapter out of the slot.

7. If you are installing another adapter in this expansion slot, follow the instructions

given under “Replacement” on page 7-36 below.

Chapter 7. Removal and Replacement Procedures

7-35

Summary of Contents for RS/6000 H50








































































































































































































































































































































Search results

Summary of Contents for RS/6000 H50

Reviews:

Related manuals for RS/6000 H50

Brands by name

Popular brands

IBM RS/6000 H50, Installation And Service Manual

Search results

Summary of Contents for RS/6000 H50

Reviews:

Related manuals for RS/6000 H50

Brands by name

Popular brands