IBM RS/6000 H50 Installation And Service Manual Download Page 209

Page: 209 / 327

a. Rotate the carrier latch to the open position.

1. SCSI Disk Drive

2. SSA Disk Drive

b. Position the drive carrier assembly horizontally, with the connector facing into

the bay.

c. Align the side of the carrier with the raised guides on the left of the bay.

d. Slide the carrier into the bay gently to keep from damaging the hot swap disk

drive. Slide the carrier to the rear of the bay until it is seated into the con-
nector.

Chapter 7. Removal and Replacement Procedures

7-15

Summary of Contents for RS/6000 H50








































































































































































































































































































































Search results

Summary of Contents for RS/6000 H50

Reviews:

Related manuals for RS/6000 H50

Brands by name

Popular brands

IBM RS/6000 H50, Installation And Service Manual

Search results

Summary of Contents for RS/6000 H50

Reviews:

Related manuals for RS/6000 H50

Brands by name

Popular brands